But there is not much happening on the Square at the moment. Amelia now has her clutch cable fitted and the clutch lifts nicely - it is surprising light, but then I do not have the springs fully tightened up yet. The cable will need some lubrication - we msutn't forget that.
I've also fitted up the front brake cable - Length is good, but the adjuster block needed a little easing to get the cable in the slot. Soldering next time.
The next big job is to get ready for the cyclinder head. I will need:
- head gaskets
- a carburetter stud
- one of the locating pins for the rocker cover
- some time
Hopefully I will get to that within the next week or two, but there is business travel on the horizon...
Glad to hear your clutch came together fairly well. I hope the information I provided was of some use to you. Your head looks pretty clean but I can't tell from the pictures if it will need any valve work or not, I'm hoping they don't as that would take a bit of time.
ReplyDelete