Lots of bits and bobs left to do, but at least the electrics are done. No pictures, but after blowing a couple of fuses due to an ignition circuit fault in the ammeter panel, and some poor connections to old bulbs, I have a fully functioning electrical system. Only a few items left:
- a link between the brake pedal and the brake lamp switch
- the speedometer bulb is not working
- the dynamo is untested
- the regulator is not connected at the battery
It's mainly oil system now. The sump plate went on last night:
Its a new one with a drain plug, from Drags. Oil filter and oil pressure gauge next.