Out and about on the Huntmaster again today shows that the steering head bearings are getting sorted. The handling is as good as ever, maybe a bit more sure on its feet and braking is very smooth - there is much less judder from the front forks - though it does need a little more adjustment.
Yesterday I checked the contact points and found in both positions that there was a dragging fit on a 12 thou feeler gauge. The bike started readily as usual this morning and ran very well on a 4 mile trip to Cromer.
There is conspicuous oil in the drive side silencer however I didn't notice any smoke. Is this a temporary problem that comes from leaning the bike over and dripping oil into one of the valve guides? Certainly it happens after parking on the side stand and of course the side stand causes the bike to lean towards the drive side. The oil in the exhaust could have come from the various smoke experiences I've had over the last few days. Am I clutching at straws? Is it just the rings bedding in?
The handlebar mirror is a little bit loose and needs nipping up, and the centre stand needs some oil on the pivots. Oh, and before I go, the gear lever needs to come up a notch!
No comments:
Post a Comment