Tuesday, 15 March 2016

Steering Lock

As part of the fork rebuild, I bought a steering lock for the Huntmaster from Draganfly. It fits in this forged lug on the bottom yoke, and it was obviously not originally fitted - the lug was full of maroon paint. It pushes in from underneath and is retained by a grub screw:


Here's the frame lug that the steering lock pin will fit into one day:


This next shot, which comes from someone on the AOMCC forum, shows the frame lug for the steering lock pin with the yokes in place. I guess that thin sheet over the top is to prevent the potential thief removing the lock by punching it out from above:



No comments:

Post a comment