FH - a little more progress, and a big step...

 Well there's been a little bit more progress today. First off, I've finished the second of the finned exhaust clamp bolts:

Secondly I've been talking to people in the club about tyre sizes and whether I can get my desired tyre (Avon RoadRiders) in the size that I want. Having a look at the distance between the tyre and the chain guard reveals around 3/8" to 1/2" but also that this tyre, an Avon SM Mk11, is actually a 325-19. The front tyre, a Dunlop TT100 by the way is a 90/90-19 or 3.60-19. They are both from the 1980's.

I am hoping to buy Avon RoadRider tyres but unfortunately they are not available in the right sizes for this bike. The options appear to be to use a 100/90-19 for the rear (Avon's recommended replacement for a 350-19) and a 325-19 (original size) or a 90/90-19 for the front.

The next bit of progress is very small it's just a P clip for the front brake cable. I've attempted to adjust both brakes but right now the front tyre is in the wheel clamp.

Lastly and very quietly and secretly I have hooked up the temporary fuel tank to the carburettor and started the bike. Unfortunately it will only start using Easy start, but at least it starts and runs. There may be some problem with the fuel supply or with the float bowl. It runs and returns oil and it runs nice and quietly so now I know that I have the HT needs the right way round, and the oil system is working properly, and the valve timing is correct and the ignition timing is more or less correct though it does spit back through the carburettor.

I think we'll have to wait 'til Monday to have another chance at it, but sleeping on it and looking at some of my pictures suggests that the float bowl gasket is missing. This will give you an air leak in the pilot fuelling circuit...